S11-M-10KV Oil Immersed Transformer

Features of Products
1. Meet or exceedsANSIIECGB.SANSStandards
2.Safe Handline.Installation and Operation.
3. Attractive,modern appearance
4. Reasonable Structure
5.Fully-sealed
6.Higher svstem reliability
7.High security and reliability in operation
8. High capacity of overload and efficiency
9.Robust construction having excellent short circuit and thermal withstand capabilities
10.EVERPOWER Transformers are more efficient by Reduced no-load losses and Reduced load losses

Description

S11-M-10KV Oil Immersed Transformer

S11-20KV type

S11-35KV type

Overview

S13-M series three-phase oil-immersed distribution transformer is a new product of national science and technology. Based on the structural design of new S9 series products, the leading idea of the design is to meet the reliability of the product and improve the performance of the product. According to the actual situation of the new S9 products, some loss coefficient and structure are readjusted. Make the design value of loss more consistent with the real side value: at the same time, optimize the design,

Reasonable determination of copper iron ratio, so that the material cost is lowest, reasonable structure.

Iron core, high permeability, low loss of high quality high-performance silicon steel sheet, reduce no-load loss and no-load current.

All series of high voltage windings adopt layer structure. Among products of 500KVA and below, low voltage windings are layer structure, (without segmental and continuous) for products of 630KVA and above.

The mature experience of the new S9 distribution transformer is summarized by adopting the new screw type: assembly of the transformer body. After assembly of the transformer body, it becomes a solid whole to ensure that the product can meet the electrical performance and mechanical strength in case of sudden short circuit

The degree requirement.

Wood series products for the fully sealed structure to ensure the transformer oil and the outside air isolation, prevent the aging of the oil, improve the reliability of the operation of the transformer, the oil tank using corrugated tank in the box wall open a long hole. To promote oil circulation in the corrugated sheet. The tank has the advantages of simple process, high mechanical strength, improved oil fluidity and heat dissipation, good welding effect and not easy leakage.

Oil Immersed Transformer Standard

GB1094.1-2013:GB1094.2-2013;GB1094.3-2013;GB1094.5-2008GB/T6451-2008;GB/T1094.10-2003;JB/T10088-2004 IEC60076:SANS 780STANDARDS

Features of Products

1. Meet or exceedsANSIIECGB.SANSStandards
2.Safe Handline.Installation and Operation.
3. Attractive,modern appearance
4. Reasonable Structure
5.Fully-sealed
6.Higher svstem reliability
7.High security and reliability in operation
8. High capacity of overload and efficiency
9.Robust construction having excellent short circuit and thermal withstand capabilities
10.EVERPOWER Transformers are more efficient by Reduced no-load losses and Reduced load losses

S11 series three phase distribution transformer

S11、S11-M series 11kV distribution transformer technical data

 

 

 

Reviews

There are no reviews yet.

Be the first to review “S11-M-10KV Oil Immersed Transformer”

Your email address will not be published. Required fields are marked *